首先，确定自己屏幕型号是MNG007DA5-2，已经启用独显直连模式，此时输出颜色深度是8bit

将一下内容复制，新建一个TXT文档，粘贴并保存，修改文件名为monitor.inf备用
从这里开始：
; INF file generated by Monitor Asset Manager (2.91.0.1043), 3/9/2024
; Copyright (c) 1995-2019, EnTech Taiwan.
; Internet: http://www.entechtaiwan.com
[Version]
Signature="$WINDOWS NT$"
Class=Monitor
ClassGUID={4d36e96e-e325-11ce-bfc1-08002be10318}
Provider=%MFG%
DriverVer=3/9/2024, 1.0.0.0
;CatalogFile=YourSignedCatalogFile.cat
[DestinationDirs]
DefaultDestDir=23
[SourceDisksNames]
1=%DISC%
[SourceDisksFiles]
;YourColorProfileFile.icm
[Manufacturer]
%VENDOR%=EDID_OVERRIDE,NTx86,NTamd64
[EDID_OVERRIDE.NTx86]
%PRODUCTID%=OVERRIDDEN-EDID.Install, MONITOR\CSW1652
[EDID_OVERRIDE.NTamd64]
%PRODUCTID%=OVERRIDDEN-EDID.Install.NTamd64, MONITOR\CSW1652
[OVERRIDDEN-EDID.Install.NTx86]
DelReg=DEL_CURRENT_REG
AddReg=OVERRIDDEN-EDID.AddReg, MODE1, DPMS
CopyFiles=OVERRIDDEN-EDID.CopyFiles
[OVERRIDDEN-EDID.Install.NTamd64]
DelReg=DEL_CURRENT_REG
AddReg=OVERRIDDEN-EDID.AddReg, MODE1, DPMS
CopyFiles=OVERRIDDEN-EDID.CopyFiles
[OVERRIDDEN-EDID.Install.NTx86.HW]
AddReg=OVERRIDDEN-EDID_AddReg
[OVERRIDDEN-EDID.Install.NTamd64.HW]
AddReg=OVERRIDDEN-EDID_AddReg
[OVERRIDDEN-EDID_AddReg]
;Base EDID
HKR,EDID_OVERRIDE,"0",0x01,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x0E,0x77,0x52,0x16,0x00,0x00,0x00,0x00,0x01,0x22,0x01,0x04,0xB5,0x22,0x16,0x78,0x1B,0xC1,0x75,0xA5,0x54,0x4D,0x9A,0x24,0x0D,0x50,0x54,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x60,0x6C,0x00,0xA0,0xA0,0x40,0x64,0x60,0x30,0x20,0x36,0x00,0x80,0x90,0x21,0x00,0x00,0x18,0x00,0x00,0x00,0xFD,0x0C,0x3C,0xA5,0x1A,0x1A,0x4D,0x01,0x0A,0x20,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xFC,0x00,0x4D,0x4E,0x47,0x30,0x30,0x37,0x44,0x41,0x35,0x2D,0x32,0x0A,0x20,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x98
;Extension bloc #1, e.g., CEA/CTA-EXT, DID-EXT, etc.
HKR,EDID_OVERRIDE,"1",0x01,0x70,0x20,0x79,0x00,0x00,0x81,0x00,0x14,0x74,0x1A,0x00,0x00,0x03,0x01,0x3C,0xA5,0x00,0x00,0x00,0x00,0x00,0x00,0xA5,0x00,0x00,0x00,0x00,0x00,0x22,0x00,0x14,0x4F,0xA4,0x0B,0x80,0xFF,0x09,0x9F,0x00,0x2F,0x80,0x1F,0x00,0x3F,0x06,0x63,0x00,0x02,0x00,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE2,0x90
[DEL_CURRENT_REG]
HKR,MODES
HKR,EDID_OVERRIDE
HKR,,MaxResolution
HKR,,PreferredMode
HKR,,DPMS
HKR,,ICMProfile
[DPMS]
HKR,,DPMS,,0
HKR,,PreferredMode,,"2560,1600,60"
[MODE1]
HKR,,MaxResolution,,"2560,1600,60"
[OVERRIDDEN-EDID.AddReg]
HKR,"MODES\2560,1600,60",Mode1,,"26.0-26.0,60.0-165.0,+,+"
[OVERRIDDEN-EDID.CopyFiles]
;YourColorProfileFile.icm for non-sRGB displays
[Strings]
MFG="EnTech Taiwan"
DISC="Monitor EDID Override Installation Disk"
PRODUCTID="CSW MNG007DA5-2 (CSW1652 EDID Override)"
VENDOR="CSW"
到这里不要复制。

然后进入Windows设置/Windows更新/高级选项/恢复/高级重新启动
重启后进入高级启动页面，选择7.禁用强制驱动签名

然后呢，我的还没到货，TM的，我现在想退了

本次重启后，进入控制面板，寻找监视器项，注意不是显卡

右键，更新驱动程序
选择“浏览我的电脑以查找驱动程序“，然后选择”让我的计算机上的可用驱动程序列表中选取“


选择从磁盘安装，找到刚刚做好的.inf文件所在的文件夹，会在列表发现刚刚做好的驱动，会提示该驱动没有数字签名

选中直接安装，会提示有风险，确认好你ok，装就是了，显示屏黑屏重启，此时10bit已经解锁。
前往NV控制面板进行调整，大功告成

目前测试下来，可以正常显示10bit内容，而且切换回混合模式，再回到独显直连，这个10bit依然存在，注意，如果使用校色文件，8bit和10bit显示可能存在偏差，有条件的请针对对应模式对应进行色彩文件配置。
总结一下，这个屏幕前看下来型号非常新，应该是年中才加入极光X屏幕选型的，目前不管是屏库还是其他哪里都搜不到这个屏幕的相关信息，不过可以确定的是，500nit亮度，8抖10，165hz，100srgb这些是没有缺席的，至于官方能不能给个hdr10开关、vrr适配，以及修复这个比较可笑的独显直连不能10bit的bug，真的要看机哥的诚意了，
我都叫你一声哥，麻烦给点面子，show一下你的神通吧，谢谢了。

表哥都是哪里找的教程

浅顶一下

京东方的可以直接10吗

这是啥原理啊

好好好，感谢大佬🙏

大佬，所以混合模式华星的屏幕可以直接开10bit是吗？我看群友有的说能开，但是我独显直连就不行，另外是不是不管是华星还是京东方屏幕色温都是偏暖一些？

有试成功的吗