近期我的pebble time由于未知原因自己进入了recovery，可以链接手机但是一直显示更新失败。
联系pebble售后，问题解决，分享给大家试试。
我的pebble time 很早之前刷了中文包，升级到3.8.2 后出现的问题，可能是新的系统和老的字体包不兼容。
现在刷了新的字体包，挺好的，再次谢谢分享字体包的同志。
一下是pebble团队发给我的解决办法：
Please try the following steps:
1. In your phone's bluetooth settings, tell your phone to forget about the Pebble
／／ 在iphone蓝牙设置里忘记pebble
2. Delete the Pebble app from your phone.
／／删除pebble time 手机端软件
3. Clear your Notification Center (pull down on your iPhone and tap the X next to each group and tap clear).
／／清空通知栏
4. Then, restart your phone by holding the Lock and Home buttons until the Apple logo appears.
／／通过同时按住电源和home键直到黑标白屏
5. On the Pebble, Try pressing and holding the left + right middle + right top buttons until the backlight flashes and the Pebble reboots. This will reflash the firmware.
／／ 在pebble上，同时按住左后退，右上键和中键直到pebble重启，这一步会刷到内置的早期固件（基础骨架固件）。
6. Pebble will now show up on the Bluetooth list as not connected/paired; click on the name to pair.
／／手机端，蓝牙处，pebble应该出现在发现的设备列表中，且显示未链接，点击以链接
7. Install the Pebble app on your phone.
／／在手机端重新安装pebble 手机端软件
8. Once the Pebble is successfully paired/connected again, please try to update to the current firmware.
／／打开手机端pebble软件并链接pebble，链接成功后应刷新到最新固件
Please let me know if this doesn't resolve the issue.
Best Regards,
Ammar
联系pebble售后，问题解决，分享给大家试试。
我的pebble time 很早之前刷了中文包，升级到3.8.2 后出现的问题，可能是新的系统和老的字体包不兼容。
现在刷了新的字体包，挺好的，再次谢谢分享字体包的同志。
一下是pebble团队发给我的解决办法：
Please try the following steps:
1. In your phone's bluetooth settings, tell your phone to forget about the Pebble
／／ 在iphone蓝牙设置里忘记pebble
2. Delete the Pebble app from your phone.
／／删除pebble time 手机端软件
3. Clear your Notification Center (pull down on your iPhone and tap the X next to each group and tap clear).
／／清空通知栏
4. Then, restart your phone by holding the Lock and Home buttons until the Apple logo appears.
／／通过同时按住电源和home键直到黑标白屏
5. On the Pebble, Try pressing and holding the left + right middle + right top buttons until the backlight flashes and the Pebble reboots. This will reflash the firmware.
／／ 在pebble上，同时按住左后退，右上键和中键直到pebble重启，这一步会刷到内置的早期固件（基础骨架固件）。
6. Pebble will now show up on the Bluetooth list as not connected/paired; click on the name to pair.
／／手机端，蓝牙处，pebble应该出现在发现的设备列表中，且显示未链接，点击以链接
7. Install the Pebble app on your phone.
／／在手机端重新安装pebble 手机端软件
8. Once the Pebble is successfully paired/connected again, please try to update to the current firmware.
／／打开手机端pebble软件并链接pebble，链接成功后应刷新到最新固件
Please let me know if this doesn't resolve the issue.
Best Regards,
Ammar
