ati闭源驱动安装失败，问题解觉不了。

求大神。

还真没有遇到过这样的问题，你的内核是自己编译过的还是就默认安装的
看错误可能是内核配置的问题，你看看配置文件中的CONFIG_AGP 有没有选上，没有就选上再试试
希望对你有帮助，再者就是实在没答案去国外论坛或者台湾那边的论坛问问吧 那边linux比较活跃

上面我说的那个内核选项是ati闭源驱动必须勾选的，要不你就试试官方的内核 看看能不能安装

我也遇见这个问题 求解决方法啊
Supported adapter detected.
Check if system has the tools required for installation.
fglrx installation is being forced. Installation will proceed without the required tools on the system.
Uninstalling any previously installed drivers.
Creating symlink /var/lib/dkms/fglrx/13.35.1005/source ->
/usr/src/fglrx-13.35.1005
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
cd /var/lib/dkms/fglrx/13.35.1005/build; sh make.sh --nohints --uname_r=3.13-1-686-pae --norootcheck........(bad exit status: 1)
[Error] Kernel Module : Failed to build fglrx-13.35.1005 with DKMS
[Error] Kernel Module : Removing fglrx-13.35.1005 from DKMS
------------------------------
Deleting module version: 13.35.1005
completely from the DKMS tree.
------------------------------
Done.
[Reboot] Kernel Module : update-initramfs

这么久居然都没有解决，多google一下，这个是驱动是ati 13.12吧，如果是的话要打补丁，推荐试试最新的驱动。具体参见这个http://www.phoronix.com/forums/showthread.php?91885-AMD-Catalyst-13-12-GPU-Driver-For-Linux-Released/page4